Filter
Top Products
Configuring the AP
AP-4131 Access Point Product Reference Guide 149
To update the AP firmware:
1. Copy the Firmware files on the terminal or PC hard disk.
2. Telnet to the AP using its IP address.
3. At the prompt type the password:
Symbol
The password is case-sensitive. Set the System Passwords in the Set System
Configuration screen.
The AP displays the Main Menu.
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
4. Select Enter Admin Mode and type the password:
Symbol