Filter
Top Products
Configuring the AP
130 AP-4131 Access Point Product Reference Guide
The AP displays the Main Menu.
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
4. Select Special Functions from the Main Menu and press enter.
5. At the Special Functions Menu press F3 to view the Firmware Update Menu.
Access Point
Firmware Update Menu
Use TFTP to update Access Point’s:
Firmware HTML file Firmware and HTML File Config
Use XMODEM to update Access Point’s:
Firmware HTML file Firmware and HTML File Config
Use TFTP to update ALL Access Points’:
Firmware HTML file
Alter Filename(s)/HELP URL/TFTP Server
.Firmware Filename dsap3_fw.bin
.HTML Filename dsapt3htm.bin
.Config. Filename ap_cfg.txt
.ACL Filename ap_acl.txt
.HELP URL
.TFTP Server 111.111.12.137
Previous-[F4] Exit-[ESC]
6. Select Alter Filename(s)/HELP URL/TFTP Server and press ENTER.
7. Enter the configuration filename in the Config. Filename field:
Change this only if the user or system/network administrator requires a
new filename. The default is
AP_CFG.TXT.