Filter
Top Products
Configuring the AP
54 AP-4131 Access Point Product Reference Guide
7. Press ESC to refresh the display. The AP displays the Main Menu.
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
2.2.4 Navigating the UI Using a Web Browser
Refer to the online help file for information on Web Browser navigation and
basic functionality. For file download instructions and the associated file(s)
refer to the Web page:
(http://www.symbol.com/services/downloads/download_spec24.html
) and
select Spectrum24® – 11 Mbps DS Firmware, Software, Drivers, Tools
and....
2.3 Access Point Installation
The AP UI includes an AP Installation screen to set basic parameters for a
Spectrum24 network. These parameters include designating a gateway
address that provides the ability to forward messages across routers on the
wired Ethernet.
To install an AP:
1. From the Main Menu select Enter Admin Mode. The system displays
Enter System Password:
2. Enter the default password (unless the password has been changed):
Symbol