Filter
Top Products
Configuring the AP
AP-4131 Access Point Product Reference Guide 125
TCPPort1 11 ; 1 - 1023
TCPPort1Traffic 10 ; 10 - high, 30 - standard
TCPPort2 21 ; 1 - 1023
TCPPort2Traffic 10 ; 10 - high, 30 - standard
TCPPort3 31 ; 1 - 1023
TCPPort3Traffic 10 ; 10 - high, 30 - standard
TCPPort4 41 ; 1 - 1023
TCPPort4Traffic 10 ; 10 - high, 30 - standard
TCPPort5 51 ; 1 - 1023
TCPPort5Traffic 10 ; 10 - high, 30 - standard
TCPPort6 61 ; 1 - 1023
TCPPort6Traffic 10 ; 10 - high, 30 - standard
TCPPort7 71 ; 1 - 1023
TCPPort7Traffic 10 ; 10 - high, 30 - standard
TCPPort8 81 ; 1 - 1023
TCPPort8Traffic 10 ; 10 - high, 30 - standard
TCPPort9 91 ; 1 - 1023
TCPPort9Traffic 10 ; 10 - high, 30 - standard
TCPPort10 101 ; 1 - 1023
TCPPort10Traffic 10 ; 10 - high, 30 - standard
[SNMPConfig]
AgentMode Enabled ; "Disabled", "Enabled"
TrapHost1 157.235.101.101 ; ip address or name
TrapHost2 157.235.101.102 ; ip address or name
ReadOnlyCommunity public ; up to 31 chars
ReadWriteCommunity admin ; up to 13 chars
AllTraps Disabled ; "Disabled", "Enabled"
ColdBoot Disabled ; "Disabled", "Enabled"
AuthenticationFailure Disabled ; "Disabled", "Enabled"
RadioRestart Disabled ; "Disabled", "Enabled"
AccessViolation Disabled ; "Disabled", "Enabled"
MUStateChange Disabled ; "Disabled", "Enabled"
WLAPConnectionChange Disabled ; "Disabled", "Enabled"
DHCPChange Disabled ; "Disabled", "Enabled"
SecurityProtocolError Disabled ; "Disabled", "Enabled"
; Important NOTE for SNMPv1/2c users: V3ContextName1 is same as ReadOnlyCommunity.
; Entries in either one of these fiels will reflect in the other.
; The V3UserName1 MUST remain blank for SNMPv1/2c traffic to be processed.
; Any entry in V3UserName1 field will in effect disable the SNMPv1/2c support for
; Read-only community.
; To Re-enable SNMPv1/2c support, enter a single ’space’(reserved character) in
; V3UserName1 field and reboot the AP.
V3UserName1 "" ; up to 31 chars
V3ContextName1 public ; up to 31 chars
V3ReadView1 Full ; "None", "System"