Filter
Top Products
Hardware Installation
AP-4131 Access Point Product Reference Guide 199
4.9.1 WLAP mode LED display.
When in the WLAP mode the chart below signifies the APs LED indicator
status.
For the IEEE 802.11 protocol and APs using firmware version
2.51-0X or
above only.
1. After power up, system initialization begins:
2. When a WLAP begins a full scan:
3. When one or more WLAPs are found, but still in full scan state:
4. When the WLAP is in functional state, but one or more WLAP connections
are not in Forward state:
LED State
Power On
Wired LAN Activity Off
Wireless LAN Activity Blinks slowly
LED State
Power On
Wired LAN Activity Off
Wireless LAN Activity Blinks slowly
LED State
Power On
Wired LAN Activity Off
Wireless LAN Activity Blinks slowly
LED State
Power Blinks regularly
Wired LAN Activity Blinks if activity occurs
Wireless LAN Activity Blinks slowly