Filter
Top Products
Configuring the AP
AP-4131 Access Point Product Reference Guide 145
5. Select the correct communication port, typically Direct to Com1, along
with the following parameters:
6. Select OK.
7. Press ENTER to display the Main Menu.
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
8. Select Enter Admin Mode and type the password:
Symbol
The password is case-sensitive.
emulation ANSI
baud rate 19200 bps
data bits 8
stop bits 1
parity none
flow control none