Filter
Top Products
Configuring the AP
102 AP-4131 Access Point Product Reference Guide
2.7 Configuring the SNMP Agent
The SNMP agent functions as a command responder and is a multilingual
agent responding to SNMPv1, v2c and v3 managers (command generators).
The factory default configuration maintains SNMPv1/2c support of the
community names, hence providing backward compatibility. However,
Agents with the default configuration are "Open" with minimum security
enabled.
The access point generates traps for a set of pre-defined conditions. SNMP
trap generation is programmable on a trap-by-trap basis and can be
Enabled/Disabled by the user. The current version of the agent supports
SNMPv1 traps only.
Refer to the Symbol MIB (s24dsap.mib) available on the Spectrum24 High
Rate 11 Mbps Wireless LAN Software CDROM or from
http://www.symbol.com/services/downloads/download_spec24.html.
The AP supports s24dsap.mib, MIB-II and 802dot1x.mib files.