Filter
Top Products
Monitoring Statistics
180 AP-4131 Access Point Product Reference Guide
Where:
Current # WLAP Itf Refers to the current Wireless AP interfaces in use in
a
1-4 range.
Current State On initialization, the AP can be in any of the
following states of wireless operation:
• starting the initializing process:
– Initializing
–Sending Probe
– Send Assoc Req (association request)
– Send Cfg BPDU (configuration Bridge
Protocol Data Unit)
– Wait for Probe
– Send Probe Rsp (probe response)
– Send Assoc Rsp (association response)
– Send Cfg Rsp (configuration response)
– Received Root Rsp (Root response)
• operating in wireless mode:
–Root WLAP lost
– Disabled
–Functional
Priority States the WLAP priority value assigned to the AP
under section 2.5: ”Configuring Radio Parameters”
on page 71.
Root Interface States the interface leading to the Root AP.
Root Priority States the priority value of the Root AP.
Root MAC Address States the MAC address of the Root AP.
Root Path Cost Indicates the hops between the current WLAP and
the Root AP.
Itf ID Identifies the wireless interface the AP uses to
communicate with another device.