Filter
Top Products
Configuring the AP
38 AP-4131 Access Point Product Reference Guide
2. At the prompt type the password:
Symbol
The password is case-sensitive.
3. Press the ESC key. The AP displays the Main Menu:
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
– If the session is idle (no input) for the configured time, the session
terminates.
– Press CTRL+D to manually terminate the session.
4. Proceed to section 2.14.1: ”Update Using TFTP” on page 139 to update
the AP firmware or HTML file or to section 2.2: ”Navigating the UI” on
page 48.