Filter
Top Products
Installing and Configuring Kerberos Setup Service
AP-4131 Access Point Product Reference Guide E-15
The access point can now be configured for Kerberos support via the
Serial or Telnet interfaces.
The Kerberos Configuration parameters have been moved to the Special
Functions screen in the Serial and Telnet UI.
6. From the Configure Kerberos screen set Kerberos to Enabled.
7. Set the KDC Server Name/IP to the IP Address where the KDC is setup.
8. (Optional) Set the Backup KDC Name/IP to the Name or the IP Address
of the backup or redundant KDC (if any).
9. Set the Realm Name to the Domain Name of the Win2k Server used as
the KDC.
10. Set the User ID and Password fields exactly the same as the Username
and Password set in Active Directory for the AP user account.
It is recommended that all APs have the same username and password so
the same configuration steps apply to all APs and only one account in Active
Directory is needed.
Network time can be obtained from a time server (SNTP or Daytime) other
than the same Win2k Server where the KDC resides. In the Network Time
screen, enter the IP address of the time server in the Time Server field.