Filter
Top Products
Hardware Installation
200 AP-4131 Access Point Product Reference Guide
5. When all WLAP connections are in Forward state:
Special cases:
• If the WLAP manual BSS_ID is NOT set and no other WLAP is found,
the WLAP goes to the functional state.
• If the WLAP manual BSS_ID is set and the specified WLAP is not found,
the WLAP remains in FULL Scan state permanently. The LEDs have the
following indicator status permanently:
• If the WLAP manual BSS_ID is set with the broadcast bit ON (i.e. the first
Byte is
01) and the specified WLAP is not found, the WLAP tries to
associate with another WLAP. If it still cannot find another WLAP, it goes to
Functional State.
•If the Ethernet Timeout in the System Configuration menu is set to 3,
the WLAP will keep track of the WLAP Alive BPDU. If the BPDU is missing
for WLAP Hello Time seconds, the WLAP state changes to WLAP Lost on
Ethernet and the LEDs have the following states:
LED State
Power On
Wired LAN Activity Blinks if activity occurs
Wireless LAN Activity Blinks regularly
LED State
Power On
Wired LAN Activity Off
Wireless LAN Activity Blinks slowly
LED State
Power On
Wired LAN Activity Blinks slowly
Wireless LAN Activity Off