Filter
Top Products
F-7
Troubleshooting
8. How do I return the MK1000
to its factory default settings?
(Not applicable) The majority of MK1000 setup
parameters can be returned to their
factory defaults from a screen
within the MK1000 Configuration
menu.
- Press the ‘4’ and ‘1’ buttons on the
unit simultaneously (an Enter
Password screen appears).
- Type in ‘44213’ (MK1000
Configuration screen appears).
- With the cursor (<) on System,
press ‘4’ (System Configuration
screen appears).
- Scroll the cursor down to File/DBM
by pressing the ‘3’ button three
times.
- With the cursor on File/DBM, press
‘4’ (File Sys/DBM Management
screen will appear).
- Scroll the cursor down to Delete
Database by pressing ‘3’.
- With the cursor on Delete Database,
press ‘4’. The database of modified
setup parameters is automatically
deleted. Upon exiting the MK1000
Configuration menu, the unit
defaults to its factory settings
database. See Troubleshooting
Note 1.
- Press ‘1’ (System Configuration
screen re-appears).
- Press ‘1’ (MK1000 Configuration
menu re-appears).
(continued)
Table F-1. Troubleshooting (Continued)
Problem Possible Causes Possible Solutions