Symbol Technologies MK1000 Scanner User Manual


 
3-35
Setup and Installation: Communication
Radio Configuration Screen
From the Network Configuration menu (see Figure 3-17 on page 3-27), press the Previous
or Next buttons to move the "<" cursor to the Radio option and press the Enter button. To
return to the Network Configuration menu, press the ‘1’ button to escape.
The (wireless Ethernet) Radio Config screen displays:
Figure 3-22. Radio Config Screen
Table 3-13. Radio Config Screen Definitions
Field Name Description
Radio MAC Press the Previous or Next buttons to move the "<"
cursor to this field and enter the Radio MAC
address.
The default Radio MAC address for the MK1000 (if
present) is00:A0:F8:2A:A6:37. This address is
configured at the factory and cannot be altered.
Enabled The port can be enabled or disabled, if not being
used.
The default for the MK1000 is YES (enabled). To
toggle the field setting, press the Enter button.
Radio Config
Radio Mac = 00:A0:F8:2A:A6:37
Enabled = YES
IP Address = 192.168.0.2
Netmask IP = 255.255.255.0
Gateway IP = 255.255.255.255
RF Settings =
<