Filter
Top Products
3-48
MK1000 MicroKiosk Product Reference Guide
Entering, Navigating & Saving Changes
Entering the Telnet Session
To a initiate a Telnet session with the MK1000 from a computer running a Window’s
operating system, type the following command (using your MK1000’s IP address) from a
DOS/Command prompt and press Enter:
telnet 192.168.0.1
In the example above, 192.168.0.1 represents the MK1000's IP address. If you need
assistance determining your MK1000’s IP address see the troubleshooting section.
Next, you may be asked to “ENTER PASSWORD”. Type in ‘44213’ and press Enter*. Note
while typing in the password, the cursor remains stationary while continuing to blink.
*Some Telnet clients may require a simultaneous Ctrl Enter.
Navigating the Telnet Menu
To navigate within the Telnet session, use the following buttons.
Table 3-20. Telnet Navigation Buttons
Button Description
- Moves the cursor up.
- Moves the cursor down.
Enter - Selects the highlighted item.
- Enters a value that has been typed in.
Esc - Exits the current screen and returns to the
previously displayed screen.
- Escapes a data entry field.
Ctrl-D Exits the Telnet session, WITHOUT saving
any changes.