Symbol Technologies MK1000 Scanner User Manual


 
F-12
MK1000 MicroKiosk Product Reference Guide
11.MK1000 will not
communicate over a
wireless-Ethernet
connection.
Unit does not support a
wireless Ethernet
connection.
1. Confirm your unit supports a
wireless (RF) Ethernet connection.
- Find the model number (see sticker
attached on the back of the unit).
The model number structure is
MK1000-xxx???xxxxx. To support a
wireless Ethernet connect, one of
the following designations must be
present: 2M1, 2M5, 11M, AL1, AL2
or AL3.
2. Determine the MK1000’s IP
Address.
- Press the ‘4’ and ‘1’ buttons on the
unit simultaneously (an Enter
Password screen appears).
- Type in ‘44213’ (MK1000
Configuration menu appears).
- Scroll the cursor (<) down to
Network by pressing the ‘3’ button.
- With the cursor on Network, press
‘4’ (Network Configuration screen
appears).
- Scroll the cursor down to Radio by
pressing the ‘3’ button three times.
- With the cursor on Radio, press ‘4’
(Radio Configuration screen
appears).
- The 4th line shows the MK1000's
wireless IP Address - record it on a
sheet of paper.
- The factory default wireless IP
Address is 192.168.0.2.
(continued)
Table F-1. Troubleshooting (Continued)
Problem Possible Causes Possible Solutions