TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
120
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
URI Dialing
URI Dialing for Outgoing Calls
Adding and Conguring DNS Zones
In order for locally registered endpoints to use URI dialing
through the VCS, you must congure at least one DNS zone. To
do this:
VCS Conguration > Zones
•
.
You will be taken to the Zones page.
Click New.
You will be taken to the Create Zone page.
Enter a Name for the zone and select a Type of DNS.
Click Create Zone.
You will be taken to the Edit Zone page.
xCommand ZoneAd
•
d
xConguration Zones Zone [1..200
•
]
Name
Assigns a name to this zone.
Type
For DNS zones, this will be DNS.
Hop count
Species the hop count to be used when sending an alias
search request to this zone. If the search request was received
from another zone and already has a hop count assigned, the
lower of the two values will be used.
When dialing by URI, the hop count used is that
congured for the DNS zone that matches the URI
address.
If there is no DNS zone congured that matches the URI
address, then the query may be forwarded to a neighbor. In this
case, the hop count used will be that congured for the neighbor
zone.
H.323 mode
Determines whether or not H.323 calls will be
allowed to this zone.
SIP mode
Determines whether or not SIP calls will be
allowed to this zone.
Normal zone pattern
matching and
prioritization rules will
apply to DNS zones.
Match1 - Match5
These sections allow you to specify any ltering criteria you wish to apply to this zone.
See Conguring Matches for DNS zones for full information on how the Match options can be used.
Advanced
In most cases the options in the Advanced
section should be left at their default values.
However, some systems such as Microsoft
OCS 2007 may require these options to be
changed from the default.
Refer to the relevant TANDBERG VCS
Deployment Guide for full details on how to
congure these advanced options for specic
systems.
 previous next