TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
206
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
VCS Port Reference
VCS Ports
Service/Function Description Default Available Range Congurable via
SIP TCP outbound port
range
The range of ports to be used by outbound TCP/
TLS SIP connections to a remote SIP device
25000 - 29999
TCP/TLS
1024 - 65533
VCS Conguration > Protocols > SIP > Conguration
xConguration SIP TCP Outbound Port Start
xConguration SIP TCP Outbound Port End
Traversal media port range
For traversal calls (i.e. where the VCS is taking
the media as well as the signaling), the range
of ports to be used for the media. Ports are
allocated from this range in pairs, the rst of
each being even. Therefore the range must
start with an even number. See Conguring the
Traversal Subzone Ports for more information.
50000 - 51199
UDP
1024 - 65533 VCS Conguration > Local Zone > Traversal Subzone
xConguration Traversal Media Port Start
xConguration Traversal Media Port End
STUN Relay media port
range
The range of ports to be used for STUN media
relay.
60000 - 61200
UDP
1024 - 65534
VCS Conguration > Expressway > STUN
xConguration Traversal Server STUN Relay Media Port Start
xConguration Traversal Server STUN Relay Media Port End
LDAP used for outbound connection to an LDAP server
(if the VCS is congured to use an LDAP server
for H.350 authentication)
a random TCP source port is used
TMS used for outbound connection to TMS a random source port in the range 32768 - 65535 is used
User Policy Server used for outbound connection to a User Policy
Server
a random source port in the range 32768 - 65535 is used
 previous next