TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
158
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Conguring the VCS as a Traversal Server
Overview
The VCS Expressway can act as a rewall
traversal server. This feature means you can:
Allow your VCS to act as a traversal server
•
for other VCSs and TANDBERG Gatekeepers.
You do this by adding a new traversal server
zone on the VCS, and conguring it with
details of the traversal client.
Provide rewall traversal for any traversal-
•
enabled endpoints (i.e. TANDBERG MXP
endpoints and any other endpoints that
support the ITU H.460.18 and H.460.19
standards) registered directly with it. You
can congure the protocols and ports that
will be used.
Enable and congure STUN services.
•
Congure the ports used specically for
•
rewall traversal services.
The following sections describe how to
congure each of the above options.
VCS Conguration > Zones
•
.
You will be taken to the Zones page.
Select New.
You will be taken to the Create Zone page.
xCommand ZoneAd
•
d
Name
Enter the name you wish to give to this zone.
The name acts as a unique identier, allowing
you to distinguish between zones.
Type
From the Type drop-down menu, select
TraversalServer.
Create Zone
Click here to create the zone. You will be taken
directly to the Edit Zone page, where you can
congure the traversal server zone as required.
Adding a New Traversal Server Zone
 previous next