TANDBERG D14049.04 Network Card User Manual


 
238
D14049.04
JULY 2008
Grey Headline (continued)
Zones Zone [1..200] Neighbor Interworking SIP Video DefaultResolution : <None/QCIF/CIF/4CIF/SIF/4SIF/VGA/SVGA/XGA>
Species which video resolution to use when empty INVITEs are not allowed.
Default: CIF
Example: xConguration Zones Zone 1 Neighbor Interworking SIP Video DefaultResolution : CIF
Zones Zone [1..200] Neighbor Peer [1..6] Address : <S:0..128>
Species the IP Address or Fully Qualied Domain Name (FQDN) of the neighbor. If the neighbor zone is a VCS cluster, this will be one of the peers in that cluster.
Example: xConguration Zones Zone 1 Neighbor Peer 1 Address : 192.44.0.18
Zones Zone [1..200] Neighbor SIP Encryption Mode : <Auto/Off>
Determines whether or not the VCS will allow encrypted SIP calls on this zone.
Auto: SIP calls will be encrypted if a secure SIP transport (TLS) is used.
Off: SIP calls will never be encrypted.
Default: Auto
Example: xConguration Zones Zone 1 Neighbor SIP Encryption Mode : Auto
Zones Zone [1..200] Neighbor SIP MediaRouting Mode : <Auto/Signaled/Latching>
Species how the VCS handles the media for calls to and from this neighbor, and where it will forward the media destined for this neighbor.
Signaled: The media is always taken for calls to and from this neighbor. It will be forwarded as signaled in the SDP received from this neighbor.
Latching: The media is always taken for calls to and from this neighbor. It will be forwarded to the IP Address and port from which media from this neighbor is received.
Auto: Media is only taken if the call is a traversal call. If this neighbor is behind a NAT the VCS will forward the media to the IP Address and port from which media from this zone is received
(latching). Otherwise it will forward the media to the IP Address and port signalled in the SDP (signaled).
Default: Auto.
Example: xConguration Zones Zone [1..200] Neighbor SIP MediaRouting Mode : Auto
Zones Zone [1..200] Neighbor SIP Port: <1024..65534>
Species the port on the neighbor to be used for SIP calls to and from this VCS.
Default: 5060
Example: xConguration Zones Zone 1 Neighbor SIP Port: 5060
Zones Zone [1..200] Neighbor SIP SearchAutoResponse : <On/Off>
Determines what happens when the VCS receives a SIP search that originated as an H.323 search, destined for this zone.
Off: a SIP OPTION message will be sent to the zone.
On: searches will be responded to automatically, without being forwarded to the zone..
Default: Off.
Example: xConguration Zones Zone 1 Neighbor SIP SearchAutoResponse : Off
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xConguration