TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
250
D14049.04
JULY 2008
Grey Headline (continued)
PipeDelete
Deletes a pipe.
PipeId(r): <1..100>
The index of the pipe to be deleted.
Example: xCommand PipeDelete PipeId: 2
RemoveRegistration
Removes a registration from the VCS.
Registration: <1..3750>
The index of the registration to be removed.
RegistrationSerialNumber: <S: 1, 255>
The serial number of the registration to be removed.
Example: xCommand RemoveRegistration RegistrationSerialNumber: "a761c4bc-25c9-11b2-a37f-0010f30f521c"
RouteAdd
Adds and congures a new route.
Address(r): <S: 1, 39>
Species an IP Address used in conjunction with the Prex Length to determine the network to which this route applies.
PrexLength(r): <1..128>
Species the number of bits of the IP Address which must match when determining the network to which this route applies.
Gateway(r): <S: 1, 39>
Species the IP Address of the Gateway for this route.
Interface: <Auto/LAN1/LAN2>
Species the LAN interface to use for this route. Auto: The VCS will select the most appropriate interface to use. Default: Auto
Example: xCommand RouteAdd Address: "10.13.8.0" PrexLength: 32 Gateway: "192.44.0.1"
RouteDelete
Deletes a route.
RouteId(r): <1..50>
The index of the route to be deleted.
Example: xCommand RouteDelete RouteId: 1
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xCommand
 previous next