TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
239
D14049.04
JULY 2008
Grey Headline (continued)
Zones Zone [1..200] Neighbor SIP Transport: <UDP/TCP/TLS>
Determines which transport type will be used for SIP calls to and from this neighbor.
Default: TCP
Example: xConguration Zones Zone 1 Neighbor SIP Transport: TCP
Zones Zone [1..200] SIP Mode: <On/Off>
Determines whether SIP calls will be allowed to and from this zone.
Default: On
Example: xConguration Zones Zone 1 SIP Mode: On
Zones Zone [1..200] TraversalClient H323 Port: <1024..65534>
Species the port on the traversal server to be used for H.323 rewall traversal calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been
congured in the Traversal Server zone for this VCS.
Default: 2777
Example: xConguration Zones Zone 2 TraversalClient H323 Port: 2777
Zones Zone [1..200] TraversalClient H323 Protocol: <Assent/H46018>
Determines which of the two rewall traversal protocols will be used for calls to and from the traversal server.
Note: the same protocol must be set on the server for calls to and from this traversal client.
Default: Assent
Example: xConguration Zones Zone 2 TraversalClient H323 Protocol: Assent
Zones Zone [1..200] TraversalClient Peer [1..6] Address : <S:0..128>
Species the IP Address or Fully Qualied Domain Name (FQDN) of the traversal server. If the traversal server is a VCS Expressway cluster, this will be one of the peers in that cluster.
Example: xConguration Zones Zone 2 TraversalClient Peer 1 Address : "10.192.168.1"
Zones Zone [1..200] TraversalClient RetryInterval: <1..65534>
Species the interval (in seconds) with which a failed attempt to establish a connection to the traversal server should be retried.
Default: 120
Example: xConguration Zones Zone 2 TraversalClient RetryInterval: 120
Zones Zone [1..200] TraversalClient SIP Port: <1024..65534>
Species the port on the traversal server to be used for SIP calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been congured in the
Traversal Server zone for this VCS.
Default: 5060
Example: xConguration Zones Zone 2 TraversalClient SIP Port: 5060
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xConguration
 previous next