TANDBERG D14049.04 Network Card User Manual


 
71
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Interworking
About Interworking
The VCS is able to act as a gateway between
SIP and H.323, translating calls from one
protocol to the other. This is known as
“interworking”.
By default, the VCS will act as a SIP-H.323 and
H.323-SIP gateway but only if at least one of
the endpoints is locally registered.
You can change this setting so that the VCS
will act as SIP-H.323 gateway regardless of
whether the endpoints involved are locally
registered.
You also have the option to disable
interworking completely.
Overview Conguring Interworking
Interworking options are congured via:
VCS Conguration > Protocols > Interworking
.
You will be taken to the Interworking page.
xConguration Interworking Mod
e
H.323 <-> SIP interworking mode
Determines whether or not the VCS will act as a gateway between SIP and H.323 calls.
Off: the VCS will not act as a SIP-H.323 gateway.
RegisteredOnly: the VCS will act as a SIP-H.323 gateway but only if at least one of the endpoints is
locally registered.
On: the VCS will act as SIP-H.323 gateway regardless of whether the endpoints are locally
registered.
!
We recommend that you leave this
setting as RegisteredOnly (where
calls are interworked only if at least
one of the endpoints is locally registered).
Unless your network is correctly congured,
setting it to On (where all calls can be
interworked) may result in unnecessary
interworking, for example where a call between
two H.323 endpoints is made over SIP, or vice
versa.
Save
Click here to save your changes.
Calls for which the VCS is acting as an
SIP to H.323 gateway are traversal
calls. They will therefore require a
traversal call licence.