TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
234
D14049.04
JULY 2008
Grey Headline (continued)
Zones LocalZone Traversal H323 UDPProbe RetryCount: <1..65534>
Sets the number of times traversal-enabled endpoints registered directly with the VCS will attempt to send a UDP probe to the VCS.
Default: 5
Example: xConguration Zones LocalZone Traversal H323 UDPProbe RetryCount: 5
Zones LocalZone Traversal H323 UDPProbe RetryInterval: <1..65534>
Sets the frequency (in seconds) with which traversal-enabled endpoints registered directly with the VCS will send a UDP probe to the VCS.
Default: 2
Example: xConguration Zones LocalZone Traversal H323 UDPProbe RetryInterval: 2
Zones LocalZone TraversalSubZone Bandwidth PerCall Limit: <1..100000000>
Species the bandwidth limit (in kbps) applied to any one traversal call being handled by the VCS (applies only if Mode is set to Limited).
Default: 1920
Example: xConguration Zones LocalZone TraversalSubZone Bandwidth PerCall Limit: 1920
Zones LocalZone TraversalSubZone Bandwidth PerCall Mode: <Limited/Unlimited/NoBandwidth>
Determines whether there is a limit on the bandwidth of any one traversal call being handled by the VCS.
NoBandwidth: no bandwidth available. No traversal calls can be made.
Default: Unlimited
Example: xConguration Zones LocalZone TraversalSubZone Bandwidth PerCall Mode: Limited
Zones LocalZone TraversalSubZone Bandwidth Total Limit: <1..100000000>
Species the total bandwidth (in kbps) allowed for all traversal calls being handled by the VCS (applies only if Mode is set to Limited).
Default: 500000
Example: xConguration Zones LocalZone TraversalSubZone Bandwidth Total Limit: 500000
Zones LocalZone TraversalSubZone Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not there is a limit to the total bandwidth of all traversal calls being handled by the VCS.
NoBandwidth: no bandwidth available. No traversal calls can be made.
Default: Unlimited
Example: xConguration Zones LocalZone TraversalSubZone Bandwidth Total Mode: Limited
Zones Zone [1..200] DNS Interworking SIP Audio DefaultCodec : <G711u/G711a/G722_48/G722_56/G722_64/G722_1_16/G722_1_24/G722_1_32/G722_1_48/G723_1/G728/G729/AALCD_48/
AALCD_56/AALCD_64/AMR>
Species which audio codec to use when empty INVITEs are not allowed.
Default: G711u
Example: xConguration Zones Zone [1..200] DNS Interworking SIP Audio DefaultCodec : G711u
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xConguration
 previous next