TANDBERG D14049.04 Network Card User Manual


  Open as PDF
of 276
 
244
D14049.04
JULY 2008
Grey Headline (continued)
CheckBandwidth
A diagnostic tool that returns the status and route (as a list of nodes and links) that a call of the specied type and bandwidth would take between two nodes. Note that this command does
not change any existing system conguration.
Node1(r): <S: 1, 50>
The subzone or zone from which the call originates.
Node2(r): <S: 1, 50>
The subzone or zone at which the call terminates.
Bandwidth(r): <1..100000000>
The requested bandwidth of the call (in kbps).
CallType(r): <Traversal/NonTraversal>
Whether the call type is Traversal or Non Traversal.
Example: xCommand CheckBandwidth Node1: "DefaultSubzone" Node2: "UK Sales Ofce" Bandwidth: 512 CallType: nontraversal
CheckPattern
A diagnostic tool that allows you to check the result of an alias transform (local or zone) before you congure it on the system. Note that this command does not change any existing system
conguration.
Target(r): <S: 1, 60>
The original alias.
Pattern(r): <S: 1, 60>
The pattern against which the alias is to be compared.
Type(r): <Exact/Prex/Sufx/Regex>
The way in which the pattern must match the alias in order for the transform to be applied.
Behavior(r): <Strip/Replace>
The way in which the alias will be modied.
Replace: <S: 1, 60>
(Applies only if Behavior is set to Replace.) The string to be substituted for the part of the alias that matched the pattern.
Example: xCommand CheckPattern Target: "john.smith@example.net" Pattern: "@example.net" Type: "sufx" Behavior: replace Replace: "@example.com"
CredentialAdd
Adds an entry to the local authentication database.
CredentialName(r): <S: 1, 128>
Denes the name for this entry in the local authentication database.
CredentialPassword(r): <S: 1, 128>
Denes the password for this entry in the local authentication database.
Example: xCommand CredentialAdd CredentialName: "John Smith" CredentialPassword: "password123"
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xCommand
 previous next