Filter
Top Products
242
D14049.04
JULY 2008
Grey Headline (continued)
Overview
The xCommand group of commands are used
to add and delete items and issue system
commands.
The following pages list all the xCommand
commands currently available on the VCS.
To issue a command, type the command as
shown, followed by one or more of the given
parameters and values. The valid values for
each parameter are indicated in the angle
brackets following each parameter; these are
explained opposite.
To obtain information about using each of the
xCommand commands from within the CLI:
type
•
xCommand or xCommand ? to return
all current xCommand commands available
on the VCS.
type
•
xCommand <command> or
xCommand <command> ? to return all
parameters for that command, along with
the valuespace and a description for each.
The valid value for this
parameter is a string. The
minimum and maximum
number of characters is
shown after the S.
When issuing this command,
the string must be typed in
double quotes.
The valid values for this
parameter are one of the
options shown within the
angle brackets.
The valid value for this
parameter is an integer. The
minimum and maximum
values are shown within the
angle brackets.
(r) indicates that this is a
required parameter. The (r)
is not part of the command.
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Command Reference - xCommand