TANDBERG D14049.04 Network Card User Manual


 
49
D14049.04
JULY 2008
Grey Headline (continued)
Events and Levels
Event Description Level
Admin Session Finish
An administrator has logged off the system. 1
Admin Session Login Failure
An unsuccessful attempt has been made to log in as an administrator. This could be because an incorrect username or password (or both) was entered. 1
Admin Session Start
An administrator has logged onto the system. 1
Application Failed
The VCS application is out of service due to an unexpected failure. 1
Application Start
The VCS has started. Further detail may be provided in the Detail event parameter. 1
Application Warning
The VCS application is still running but has experienced a recoverable problem. Further detail may be provided in the Detail event parameter. 1
Beginning System Backup
A system backup has started. 1
Beginning System Restore
A system restore has started. 1
Call Answer Attempted
An attempt to answer a call has been made. 1
Call Attempted
A call has been attempted. 1
Call Connected
A call has been connected. 1
Call Diverted
A call has been diverted. 1
Call Disconnected
A call has been disconnected. 1
Call Rejected
A call has been rejected. The Reason event parameter contains a textual representation of the H.225 additional cause code. 1
Completed System Backup
A system backup has completed. 1
Completed System restore
A system restore has completed. 1
Decode Error
A syntax error was encountered when decoding a SIP or H.323 message. 1
Eventlog Cleared
An operator cleared the event log. 1
External Server
Communication Failure
Communication with an external server failed unexpectedly. The Detail event parameter should differentiate between ‘no response’ and ‘request
rejected’. Servers concerned are:
DNS
LDAP servers
Neighbor Gatekeeper
NTP servers
Peers
1
Hardware Failure
There is an issue with the VCS hardware. If the problem persists, contact your TANDBERG support representative. 1
License Limit Reached
Licensing limits for a given feature have been reached. The Detail event parameter species the facility/limits concerned. Possible values for the detail
eld are:
Non Traversal Call Limit Reached
Traversal Call Limit Reached
1
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Event Log