Filter
Top Products
178
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications Maintenance
Upgrading Software
Release key
Enter the 16-character Release Key that has
been provided to you. This is not required if
you are upgrading to a dot release, e.g. X3.0
to X3.1.
If you have cut and pasted the release key,
ensure there are no leading or trailing spaces.
Install Software
Click Install Software. After a few moments
you will be taken to the Upgrade Conrmation
page. This page will list any warnings of which
you need to take note before proceeding with
the upgrade.
Select the software le
Enter the path of the software image le, or
click Browse to locate it on the network.
System Information
This section tells you about the
software and hardware that currently
make up your system.
Upgrading via the Web Interface
Before you start the upgrade, ensure
that the software image le for the new
version has been saved in a network
location that can be accessed via the web
interface. Also ensure that you have the
16-character Release Key readily available (this
is not required if you are upgrading to a dot
release, e.g. X3.0 to X3.1).
To upgrade your software via the web interface:
Maintenance > Upgrade
•
.
You will be taken to the Upgrade page.
!
You must restart the system after you
have uploaded the new software
version and conrmed the upgrade, in
order for the installation to complete. Any
conguration changes you make between
conrming the upgrade and restarting will be
lost, so we recommend restarting your system
immediately.
Continue with Upgrade
Check the details and click Continue with
Upgrade to proceed.
Abort Upgrade
Click here to cancel the upgrade and return to
the Upgrade page.