Filter
Top Products
153
It is sometimes necessary to shut down the MCU, generally to restart as part of an upgrade (see Upgrading the
firmware). You should also shut down the MCU before intentionally removing power from the MCU.
Shutting down the MCU will cause all conference participants to be disconnected, and allows the MCU to ensure that
all data (such as Call Detail Records) is stored correctly. You will lose network connectivity with the MCU for a few
minutes while you restart the unit.
To shut down the MCU, follow these steps:
1. Go to .
2. Click the button.
3. Confirmation of shutdown is required; the button changes to .
4. Click again to confirm.
5. The MCU will begin to shut down. The banner at the top of the page will change to indicate this.
When the shutdown is complete, the button changes to .
6. Click this button a final time to restart the MCU.