Filter
Top Products
96
You can configure the Codian MCU with one or more H.323 gateways:
To add an H.323 gateway, go to . After entering the settings described
below, click .
To update an existing H.323 gateway, go to and click on a gateway name. After updating the
settings described below, click .
The descriptive name of the gateway.
All gateways must have a unique name.
The IP address or host name of the gateway.
Choose whether to use the unit-wide setting for
motion/sharpness trade off, or configure an
individual setting for this gateway. Choose from:
Use unit-wide setting: this is the default
value. In this case, connections to the
gateway will use the motion/sharpness
tradeoff setting from the
page
Favor motion: the MCU will try and use a
high frame rate. That is, the MCU will
strongly favor a resolution of at least 25
frames per second
Favor sharpness: the MCU will use the
highest resolution that is appropriate for
what is being viewed
Balanced: the MCU will select settings
that balance resolution and frame rate
(where the frame rate will not be less
than 12 frames per second)
The settings for motion (frames per second) and
sharpness (frame size or resolution) are
negotiated between the endpoint and the MCU.
This setting controls how the MCU will negotiate
the settings to be used with this endpoint.
The network capacity (measured in bits per
second) used by the media channels established by
the MCU to a single participant.
Sets the bandwidth that the endpoint will
advertise to the MCU when it calls it.