Filter
Top Products
80
The Codian MCU allows you to configure auto attendants on it, which allows users to more easily join conferences.
Displaying the auto attendant list
Adding and updating an auto attendant
Adding a custom banner
You can display an overview of the configured auto attendants on the MCU:
1. Go to .
2. Click the tab.
The name of the auto attendant
The number that you can dial to connect to the
auto attendant
The status of an auto attendant with respect to its
gatekeeper registration. The possible states are:
This auto attendant is not configured to
be registered with the gatekeeper;
because of this, there is no applicable
registration status to show.
This auto attendant is in the process of
registering with the gatekeeper.
The auto attendant is in the process of
unregistering with the gatekeeper. This
might occur if:
o Gatekeeper registration has
been turned off (either for that
auto attendant only or for the
entire MCU)
o The configured gatekeeper has
just been changed and the MCU
is in the process of
unregistering from the previous
gatekeeper before registering
its auto attendants with the new
one.
/
If the MCU fails to register an auto
For tips on configuring gatekeepers, see
Gatekeeper settings.