Filter
Top Products
82
Auto attendants simplify the way participants can join conferences. By calling an auto attendant using their video
endpoint, a participant can choose from menu options and join or start conferences. No gateway or gatekeeper is
required. (The auto attendant is configured on the MCU.)
To add an auto attendant:
1. Go to .
2. Click the tab.
3. Click .
4. Refer to the table below for the most appropriate settings for the auto attendant.
5. After entering the settings, click .
To update an existing auto attendant:
1. Go to .
2. Click the tab.
3. Click the name of an auto attendant.
4. Refer to the table below for the settings to change for this auto attendant.
5. After updating the settings, click .
The name of the auto attendant.
An optional title to be shown at the top of the
screen when an endpoint calls in to this auto
attendant.
The number with which to register the auto
attendant on the gatekeeper and/or SIP registrar.
See Gatekeeper settings and SIP settings for
details.
Check if you want the Numeric
ID registered with the H.323 gatekeeper; check
if you want the Numeric ID registered
with the SIP registrar.
Note that for SIP, you must configure the ID with
the SIP registrar for the MCU to be able to
register that ID.
Assigns a password to the auto attendant.
If you set a PIN, all participants using the auto
attendant will be required to enter this password.
Verifies the password.
If Enabled, displays the Create new conference option
on the auto attendant so that the participant can
create new ad hoc conferences using the auto
attendant.
If disabled, participants will not be able to create
new conferences from the auto attendant.
Note that this option will not be available if you