TANDBERG MSE 8510 Computer Hardware User Manual


 
76
Media packet loss reported by receiver reports
sent to the MCU by the far end.
A count of the number of "sender report" type
RTCP packets received by the MCU.
These are typically sent by any device that is
sending RTP media.
A count of the number of reports seen by the
MCU that are neither sender nor receiver
reports.
The IP address and port to which the MCU is
sending RTCP packets about this stream.
The number of packets sent.
The IP address and port to which RTCP (Real
Time Control Protocol) packets are being sent for
the audio and video streams.
A count of the number of "receiver report" type
RTCP packets seen by the MCU.
A single RTCP packet may contain more than one
report of more than one type. These are generally
sent by any device receiving RTP (Real Time
Protocol) media from the network and are used
for auditing bandwidth, errors, and so on by the
MCU.
A count of the reported packet loss on the control
channel.
A count of the number of "sender report" type
RTCP packets sent by the MCU.
These are typically sent by any device that is
sending RTP media.
A count of the number of reports seen by the
MCU that are neither sender nor receiver
reports.
The IP address and port to which the MCU is
sending RTCP packets about this stream.
The number of packets sent.
The number of fast update requests sent and
received.
The number of flow control messages sent and
received.