Filter
Top Products
Troubleshooting
CAUTION
Remove all jewelry, especially rings and
watches, before doing any electrical
troubleshooting or testing.
Starting Problems
For effective troubleshooting and repairs, there must be
a good understanding of the electrical circuits and com
-
ponents used on this machine (see Electrical Schematic
in this chapter).
NOTE: See the Kawasaki FJ180V Service Manual at
the end of Chapter 3 – Engine for troubleshooting of en
-
gine electrical problems.
Problem Possible Causes Correction
Engine will not start. ON/OFF switch is in the OFF
position.
Turn switch to ON.
ON/OFF switch is faulty. Replace ON/OFF switch.
Ignition spark plug lead is not
connected to spark plug.
Connect high tension lead to spark
plug.
Electrical wires are loose or Check electrical connections.
damaged. Repair wiring.
Engine is malfunctioning. See Kawasaki FJ180V Service
Manual at the end of Chapter 3 –
Engine.
Engine will start, but will not
continue to run.
Electrical wires are loose or
damaged.
Check electrical connections.
Repair wiring.
ON/OFF switch is faulty. Replace ON/OFF switch.
Engine is malfunctioning. See Kawasaki FJ180V Service
Manual at the end of Chapter 3 –
Engine.
Electrical System
Page 4 – 4
Line Painter 1200