Filter
Top Products
46
1600XP Series Installation and Operation Manual
Settings Parameters
The following table lists parameters parameters that can be viewed under the MONITOR tab of the touch-
screen display.
The security levels are, from lowest to highest level:
Access Level Sec. Abbreviation
User USR
Administrator ADM
The table headings are:
Cmd ID• - Command ID number. A three digit number between 000 and 999. Not all numbers have
an associated parameter.
Description on LCD• - Display text, often abbreviated.
Brief Description• - Brief description of the function of the parameter.
Location Map - Tab/Blk• - Gives the menu location for the parameter by Tab and Block.
The tabs are Main, Monitor, Settings, Records.
E.g. Cmd 501 (Battery Voltage can be viewed under the Monitor tab, in the BATT block)
UPS Status is displayed in the display header Status eld.
UPS Faults and Warnings are shown in the display footer, at the bottom of the display.
Example• - Shows an example of the parameter displayed on the touchscreen.
Rqd Security Level to Change/By• - The required security level to change a parameters value or set-
ting: User, Administrator, Distributor.