Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 153
2
1141NetworkDisplay of MAC addressALL-SYS(**:**:**:**:**:**)
The address is dis-
played as above (6-byte
data is divided by a
colon at every 2 bytes).
2
1143NetworkNetwareUserAuthContext
Name2
ALL-UTYMaximum 127 letters12
1144NetworkNetwareUserAuthTree
Name3
ALL-UTYMaximum 47 letters12
1145Mainte-
nance
(Remote)
Counter notification
Remote FAX setting
ALL-SYSMaximum 32 digits
Enter a hyphen with the
[MONITOR/PAUSE]
button.
11
1148NetworkNetwareUserAuthContext
Name3
ALL-UTYMaximum 127 letters12
1370Image
process-
ing
Image quality control time
accumulating counter
ALL0
<8 digits>
MCounts driving count of
the drum (image qual-
ity control time).
Counts up when drum
motor and image quality
control are ON.
1
1371Image
process-
ing
Accumulated counter of
output pages since the per-
forming of image quality
control
ALL0
<4 digits>
MCleared to 0! by the
image quality closed-
loop control. Counts up
with the number of
printing job received
after this control.
2
1372Image
process-
ing
Heater and energizing time
accumulating counter Dis-
play/0 clearing
ALL0
<8 digits>
MCounts up the heater
control time accumu-
lated (when power of
the copier is ON) but
does not count at the
Sleep Mode. When the
counter value of the
fuser belt is cleared,
this counter value is
also cleared in sync at
PM support mode.
1
1378Image
process-
ing
Fuser roller ready tempera-
ture time accumulating
counter
ALL0
<8 digits>
MCounts up the heater
control time accumu-
lated (on standby).
When the counter value
of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
2
1380Image
process-
ing
Fuser roller printing tem-
perature time accumulating
counter
ALL0
<8 digits>
MCounts up the heater
control time accumu-
lated (during printing).
When the counter value
of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
2
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e
05/11