Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 57
2
466-0Paper
feeding
Adjustment of
paper push-
ing amount /
Bypass feed-
ing
Plain
paper
ALL143
<0-255>
MWhen the value
increases by 1!, the
driving speed of bypass
feed roller increases by
approx. 2 ms when the
paper transport is
started from the regis-
tration section.
*Post card is sup-
ported only for JPN
model.
4
466-1Post cardALL170
<0-255>
M4
466-4Thick
paper 1
ALL143
<0-255>
M4
466-5Thick
paper 2
ALL143
<0-255>
M4
466-6Thick
paper 3
ALL143
<0-255>
M4
466-7OHP filmALL143
<0-255>
M4
467Paper
feeding
Adjustment of paper push-
ing amount/Duplex feed-
ing (short size)
ALL128
<0-255>
MWhen the value
increases by 1!, the
driving speed of ADU
transport roller
increases by approx.
2 ms when the paper
transport is started from
the registration section.
1
468-0FinisherFine adjust-
ment of bind-
ing position/
folding posi-
tion
A4-R
/LT-R
ALL0
<-14-14>
MWhen the value
increases by 1!, the
binding/folding position
shifts toward the right
page by 0.25 mm.
4
468-1B4ALL0
<-14-14>
M4
468-2A3/LDALL0
<-14-14>
M4
469-0Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Upper drawer
/ Thick paper
1)
Long
size
ALL18
<0-63>
MWhen the value
increases by "1", the
aligning amount
increases by approx.
0.8 mm.
<Paper length>
Long size:
330 mm or longer
Middle size:
220 mm to 329 mm
Short size 1:
205 mm to 219 mm
Short size 2:
204 mm or shorter
4
469-1Middle
size
ALL18
<0-63>
M4
469-2Short
size 1
ALL18
<0-63>
M4
469-3Short
size 2
ALL18
<0-63>
M4
470-0Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Lower drawer
/ Thick
paper 1)
Long
size
ALL15
<0-63>
M4
470-1Middle
size
ALL15
<0-63>
M4
470-2Short
size 1
ALL15
<0-63>
M4
470-3Short
size 2
ALL15
<0-63>
M4
471-0Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(PFP upper
drawer / Thick
paper 1)
Long
size
ALL15
<0-63>
M4
471-1Middle
size
ALL15
<0-63>
M4
471-2Short
size 1
ALL15
<0-63>
M4
471-3Short
size 2
ALL15
<0-63>
M4
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e