Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE© June 2005 TOSHIBA TEC
2 - 156
1422Data
over-
write kit
HDD data overwriting type
setting
ALL0
<0-2>
SYSSelect the type of the
overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0:LOW
1:MEDIUM
2:HIGH
1
1424Data
over-
write kit
HDD data clearing type
setting (forcible clearing)
ALL0
<0-2>
SYSSelect the type of the
overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0:LOW
1:MEDIUM
2:HIGH
1
1426Data
over-
write kit
Forcible HDD data clearingALL--HDD data is cleared in
the procedure set in 08-
1424.
*This setting is
enabled only when
the GP-1060 is
installed.
3
1427Data
over-
write kit
Forcible NVRAM data all
clearing
ALL--When this code is per-
formed, the equipment
cannot be started up.
*This setting is
enabled only when
the GP-1060 is
installed.
3
1428Data
over-
write kit
Forcible SRAM backup
data all clearing
ALL--When this code is per-
formed, the equipment
cannot be started up.
*This setting is
enabled only when
the GP-1060 is
installed.
3
1429User
interface
Margin width
(Top/Bottom, Left/Right)
ALLFront: 7/
Back: 7
<2-100/-
100-100>
SYSThis setting is not
reflected in "Right",
even if the value less
than 2 is set for "Back".
10
1430User
interface
Margin width
(Bookbinding margin)
ALL14
<2-30>
SYS1
1431NetworkACC
(AT_CASETTE_CHANGE)
for Printer/Box printing
ALL1
<0-2>
SYS0: ACC prohibited
1: Only in the same
paper direction
2: In both same direc-
tion and different
directions
1
1432NetworkPrivate-print-only modeALL0
<0-1>
SYS0:Normal
1:Private-print-only
mode
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e
05/11