Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 49
2
361ScannerLog table switching for
RADF copying
ALL
(color)
0
<0-4>
SYS0: Same log table as
the one used at
copying with original
glass
1: Background repro-
duction - Light 2
2: Background repro-
duction - Light 1
3: Background repro-
duction - Dark 1
4: Background repro-
duction - Dark 2
1
362ALL
(black)
0
<0-4>
SYS0: Same log table as
the one used at
copying with original
glass
1: Background repro-
duction - Light 2
2: Background repro-
duction - Light 1
3: Background repro-
duction - Dark 1
4: Background repro-
duction - Dark 2
1
363ScannerData transfer of character-
istic value of scanner / SYS
board SLG board
SCN-SYSTransfers the character-
istic values of the scan-
ner (shading correction
factor / RGB color cor-
rection / reproduction
ratio color aberration
correction) from the
NVRAM of the SYS
board to the NVRAM of
the SLG board.
6
364ScannerData transfer of character-
istic value of scanner / SLG
board SYS board
SCN-SYSTransfers the character-
istic values of the scan-
ner (shading correction
factor / RGB color cor-
rection / reproduction
ratio color aberration
correction) from the
NVRAM of the SLG
board to the NVRAM of
the SYS board.
6
365RADFRADF lead-
ing edge posi-
tion 1
adjustment
for single-
sided orig-
inal
ALL50
<0-100>
SYSWhen the value
increases by 1!, the
copied image of original
fed from the RADF
shifts toward the trail-
ing edge of paper by
approx. 0.1 mm.
1
366for double
sided orig-
inal
ALL50
<0-100>
SYS1
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e