Filter
Top Products
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089
1.1 Introduction
E1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
Thank you for choosing the TOSHIBA B-EX4T1 series bar code printer.
This Owner’s Manual contains from general set-up through how to
confirm the printer operation using a test print, and should be read
carefully to help gain maximum performance and life from your printer.
For most queries please refer to this manual and keep it safe for future
reference. Please contact your TOSHIBA TEC representative for further
information concerning this manual.
This printer has the following features:
• The print head block can be opened providing smooth loading of
media and ribbon.
• Various kinds of media can be used as the media sensors can be
moved from the centre to the left edge of the media.
• Web functions such as remote maintenance and other advanced
network features are available.
• Superior hardware, including the specially developed 8 dots/mm (203
dots/inch) or 12 dots/mm (305 dots/inch) thermal print head which
will allow very clear print at a printing speed of 3 inches/sec., 6
inches/sec., 10 inches/sec., 12 inches/sec. or 14 inches/sec. with 8
dots/mm thermal head or 3 inches/sec., 5 inches/sec., 8 inches/sec., 10
inches/sec., 12 inches/sec. or 14 inches/sec. with 12 dots/mm thermal
head.
• Besides the optional Cutter Module, there is also an optional Peel off
Module, Ribbon Saving Module, RS-232C I/F card, Centronics I/F
card, Expansion I/O Card, Wireless LAN I/F card, the RTC/USB host
I/F card, RFID module, and Narrow width platen kit.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
TOSHIBA TEC shall have no
liability for any damage of
any kind sustained during
transportation of the product.
2. Keep the cartons and pads
for future transportation of
the printer.