Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-24
2.6.2 Parameter Setting
(Cont.)
2.6.3 Enabling LAN/WLAN
2.6.4 Basic Program Setting
2.6.2.4 PASSWORD
(1) PASSWORD
This parameter is for system administrator only. Please do not change
the setting for this parameter.
The LAN/WLAN menu allows selecting whether or not to enable the
LAN communication and SNMP.
(1) LAN/WLAN
• OFF LAN and Wireless LAN are disabled.
• ON (AUTO) Automatically selected.
• ON (LAN) LAN is enabled.
• ON (WLAN) Wireless LAN is enabled.
(2) SNMP
• OFF SNMP is disabled.
• ON SNMP is enabled.
The following table shows the contents of the Basic program setting
menu.
Contents of the Basic Program Setting Menu
Menu Sub menu
BASIC BASIC
FILE MAINTENANCE
TRACE
EXPAND MODE
(1) BASIC
This parameter is to choose whether to enable the BASIC program.
• OFF Disables BASIC program.
• ON Enables BASIC program.
(2) FILE MAINTENANCE
The block number and BASIC program file name (up to 12 characters)
stored in the BASIC program storage area are displayed. If file name
exceeds 12 characters, the overflowing characters are not displayed.
When no file is stored, a hyphen (“-“) is displayed in place of the file
name.
USER SYSTEM MODE
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
USER SYSTEM MODE
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC