Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.8 Print Test
E2-59
2.8 Print Test (Cont.)
When using a Strip Module or an optional Cutter Module
It is necessary to set the issue mode, cut/strip position, etc. on the Printer
Driver or with TPCL (TEC Printer Command Language) in accordance
with your printing condition.
For details of the TPCL, refer to the B-EX4T/EX6T Series External
Equipment Interface Specification.
Regarding how to use the Printer Driver, refer to the Help for the
Windows Printer Drivers screen.
To gain maximum performance and life from the Cutter Module or Strip
Module, periodic cleaning is required.
Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
of injury.
For details of cleaning, refer to Section 4.1.3 Optional Cutter Module.