Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-20
2.6.2 Parameter Setting
(Cont.)
(5) PEEL OFF STATUS
This parameter is to choose whether the printer sends a strip wait
status to the host in response to a status request command.
• OFF
• ON
(6) USB I/F STATUS
This parameter is to choose whether or not to return a response to the
host via USB.
• OFF Disables sending a response via USB
• ON Enables sending a response via USB
(7) FEED KEY
This parameter is to choose the function of the FEED key.
• FEED Feeds one label.
• PRINT Prints data in the image buffer (The last printed data)
(8) KANJI CODE
This parameter is to choose a KANJI code.
• TYPE1 Windows code
• TYPE2 Original code
After selecting a Kanji code, press [ENTER] key
(9) EURO CODE
This parameter is to choose a Euro code (€).
“20” to “FF” (Specify the hex code in 2 bytes of ASCII code)
(10) AUTO HD CHK
This parameter is to choose whether to perform the auto print head
check at a power on time.
• OFF Auto print head check is not performed.
• ON Auto print head check is performed.
FF
20
FE
21