Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-17
2.6.2 Parameter Setting
(Cont.)
2.6.2.1 Printer Set
(1) MEDIA LOAD
This parameter is to choose how the printer behaves to detect the
home position.
• OFF Media loading function is disabled (Same as a feed
by [FEED] key)
• STD When the printer is tuned on, reset in batch, or print
head is closed, the printer detects a gap/black mark
and feeds the paper from the sensor to the print start
position.
• ECO When the printer is tuned on, reset in batch, or print
head is closed, the printer detects a gap/black mark
and feeds the paper to the print start position based
on the label pitch.
• ECO+Bfeed Economy + backfeed
(2) FORWARD WAIT
This parameter is to choose whether or not to activate the auto forward
wait function. This function, used in the cut mode, automatically
feeds the media forward if there is more than 1-second idle time after
printing, to prevent the top edge of the media from curling.
• OFF Disables the auto forward feed wait
• ON Enables the auto forward feed wait
(3) FORWARD WAIT POS.
When the auto forward feed wait parameter is set to ON, the feed
amount can be fine adjusted.
(4) FW/BK ACT.
• MODE1 The printer waits for next issue with 13.7-mm media
forwarded.
• MODE2 When the thermal transfer method, Transmissive
sensor, and cut issue are selected, the printer feeds 6-
mm media backward, then waits for next issue with
3-mm media forwarded.
.
+5.0mm
-5.0mm
+4.9mm
-4.9mm