Filter
Top Products
APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33089
APPENDIX 1 MESSAGES AND LEDS
EA1- 1
APPENDIX 1 MESSAGES AND LEDS
Appendix 1 describes the LCD messages displayed on the operation panel.
Symbols in the message
1: : The LED is illuminated. ~: The LED is flashing. z: The LED is unlit.
2: ****: the number of unprinted media. Up to 9999 (in pieces)
3: %%,%%%,%%%: Remaining memory size of the external memory: 0 to 09,999,999 (in K bytes)
4: ####: Remaining memory size for PC commands storage area in the internal memory: 0 to 3072 (in K bytes)
5: &&&&: Remaining memory size for writable characters storage area: 0 to 3147 (in K bytes)
LED Indicatio
n
Printer Status
Restoration by
RESTART key
Acceptance of
Status Request/
Reset Command
No. LCD Message
ONLINE ERROR Yes/No Yes/No
ON LINE
z
In online mode ----- Yes
1
ON LINE
~ z
In online mode (The printer in
communication)
----- Yes
2
HEAD OPEN
z z
The print head block is opened in
online mode.
----- Yes
3
PAUSE
z z
The printer is paused. Yes Yes
4
COMMS ERROR
z
A parity, overrun, or framing error has
occurred during communication
through the RS-232C.
Yes Yes
5
PAPER JAM
z
The media is jammed during paper
feed.
Yes Yes
6
CUTTER ERROR
z
A problem has occurred with the cutter
module.
Yes Yes
7
NO PAPER
z
The media has run out, or the media is
not loaded properly.
Yes Yes
8
NO RIBBON
z
The ribbon has run out. Yes Yes
9
HEAD OPEN
z
Feed or printing was attempted with
the print head block open.
Yes Yes
10
HEAD ERROR
z
There is a problem with the print head. Yes Yes
11
EXCESS HEAD TEMP
z
The print head is overheated. No Yes
12
RIBBON ERROR
z
The ribbon has been torn. A problem
has occurred with the sensor that
determines the torque for the ribbon
motor.
Yes Yes
13
REWIND FULL
z
An overflow error has occurred in the
rewinder unit.
Yes Yes
14
SAVING####KB/&&&&KB
or
SAVING%,%%%.%%%KB
z
Writable character or PC command
save mode
----- Yes
15
FORMAT####KB/&&&&KB
or
FORMAT%,%%%.%%%KB
z
The storage area is being initialised. ----- Yes
16
NOW LOADING…
z
TrueType font or BASIC program is
being downloaded.
----- Yes
17
MEMORY WRITE ERR.
z
An error has occurred while writing to
flash memory or USB memory.
No Yes
18
FORMAT ERROR
z
An erase error has occurred while
formatting the flash memory or USB
memory.
No Yes
19
MEMORY FULL
z
Data cannot be stored because the flash
memory or USB memory is full.
No Yes
20
Display of error message
(See Notes.)
z
A command error has occurred while
analyzing the command.
Yes Yes