Filter
Top Products
APPENDIX 4 GLOSSARIES ENGLISH VERSION EO1-33089
APPENDIX 4
GLOSSARIES
EA4- 1
APPENDIX 4 GLOSSARIES
Bar code
A code which represents alphanumeric characters
by using a series of black and white stripes in
different widths. Bar codes are used in various
industrial fields: Manufacturing, Hospitals,
Libraries, Retail, Transportation, Warehousing, etc.
Reading bar codes is a fast and accurate means of
capturing data while keyboard entry tends to be
slow and inaccurate.
Batch mode
Issue mode that continuously prints media until the
specified number of media has been printed.
Black mark
A mark printed on the media so that the printer can
maintain a constant print position by detecting this
mark.
Black mark sensor
A reflective sensor which detects the difference of
potential between the black mark and print area to
find the print start position.
Built-in rewinder mode
Printer mode of operation where a strip module is
installed to take up printed media onto the build-in
rewinder.
Cut mode
Printer mode of operation where an optional cutter
module is installed to automatically cut media from
the supply roll after they are printed. The print
command can specify to cut every media or to cut
after a set number of media have been printed.
Cutter module
A device used to cut the media.
DHCP
Dynamic Host Configuration Protocol
A communications protocol which lets a network
administrator temporarily assign an IP address to a
computer plugged into a different place in the
network.
DPI
Dot Per Inch
The unit used to express print density.
Expansion I/O interface
An interface circuit that may be installed into
printer to allow the printer to be connected to an
external device such as a wrapping machine and to
receive feed, print start, and pause signals from the
external device and to send back print, pause, and
error status signals to the external device.
Feed gap sensor
A transmissive sensor which detects the difference
of potential between the gap between labels and
the label to find the print position of the label.
Font
A complete set of alphanumeric characters in one
style of type. E.g. Helvetica, Courier, Times
Gap
Clearance between labels
IPS
Inch per second
The unit used to express print speed.
Label
A type of media with adhesive backing.
LCD
Liquid Crystal Display
Installed on the operation panel and displays
operation modes, error message and so on.
Media
Material on which data is printed by the printer.
Label, tag paper, fanfold paper, perforated paper,
etc.
Plug and Play
When Plug and Play is enabled, the PC will
automatically identify the printer (if the PC
supports Plug & Play), optimize the system
resource (IRQ and DMA), and display a message
prompting a printer driver installation.
Pre-printed media
A type of media on which characters, logos, and
other designs have been already printed.