Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-22
2.6.2 Parameter Setting
(Cont.)
(16) XML
This parameter is to choose a type of XML data to be printed.
• OFF Disables XML data printing.
• STD Standard specification
• ORACLE Oracle
• SAP SAP
• STD EXT Standard specification (External memory)
• ORACLE EXT Oracle using an external memory
• SAP EXT SAP using an external memory
(17) THRESHOLD SELECT
This parameter is to choose which threshold value for the media
sensor to validate.
• REFLECT Reflective sensor
• TRANS. Transmissive sensor
Then, choose which value to use.
• MANUAL SET Threshold set in the Threshold mode takes
effect.
• COMMAND SET Threshold set by command takes effect.
(18) ENERGY TYPE
This parameter is to choose an energy level applied to the print head.
• TRANSFER Thermal transfer print method → c
• DIRECT Thermal direct print method → d
c When TRANSFER is selected for the Energy type parameter,
choose a ribbon type.
• Semi resin1 Semi-resin 1
• Semi resin2 Semi-resin 2
• Resin1 Resin 1
• Resin2 Resin 2
• Reserve1 to Reserve6 Reserved
d When DIRECT is selected for the Energy type parameter
• Standard Standard
• Reserve1 to Reserve9 Reserved
(19) PW SAVE TIME
This parameter is to set the length of time until the printer enters the
sleep mode. (Unit: minute)
240 min.
1 min.
239 min.
2 min.