Filter
Top Products
106
The Automatic Reception Mode
(AUTO RECEIVE) is normally
selected. You can change the
reception mode by pressing the
key.
Refer to Reception Mode selec-
tion on page 62.
Press:
This facsimile can use Letter and Legal size paper. The received document is recorded (printed) within
the Effective Recording Area of the paper.
NOTES:
• If the received document is equal to or shorter than the recording area of the paper, the received
document is printed at its actual size.
• If the received document is larger than the recording area of the paper, it will be vertically and
horizontally reduced to fit on the recording paper installed. The reception will be divided onto two
sheets if the document needs to be reduced to smaller than 73% of its original size.
• If you desire to receive large originals without reduction or excessive paper usage, set the
”DISCARD” function to “ON.” If the lower part of the original exceeds the recording paper by 13
mm or less, the image will be automatically discarded. This predetermined dimension is a service
function setting. Contact your Toshiba dealer for setup.
• If the “RX REDUCTION” function is “OFF”, the larger original will be recorded on two or more
sheets. The top of the second page will repeat about 5 mm of the lower part of the first page.
Selecting the Reception Mode
Recording Paper Size
Effective
Recording
Area
B
A
C
D
Paper Size
Letter:
mm
inches
Legal:
mm
inches
B
212
8.34
212
8.34
D
279
11.0
356
14.0
A
216
8.5
216
8.5
C
274
10.8
351
13.8
Document
Recording
Paper
4.MANUAL
3.TEL/FAX
2.FAX/TAD
RECEPTION MODE
1.FAX
If Auto Receive mode is se-
lected, press:
If FAX/TAD mode is selected,
press:
If TEL/FAX mode is selected,
press:
If Manual Receive mode is se-
lected, press: