Filter
Top Products
116
Press:
+
+
This section describes the pro-
cedures to send a document to
Relay Box in a relay station.
The relay station must be com-
pliant with ITU-T F-code com-
munications. For more informa-
tion, see page 115.
NOTE:
The destination relay box
must be setup in the remote
hub unit prior to sending
documents.
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Press:
+
Relay Transmission Originating Procedure
Load the Document
1
Select the RELAY
REQUEST
3
Display the MAILBOX
Menu
2
Enter the Box Number (max. 20
digits).
Then press:
Enter the Box
Number
4
MAY-17 09:43 AM 100%
AUTO RECEIVE
04.SETUP & DELETE
03.RELAY REQUEST
02.BULLETIN BOARD
ITU MAILBOX
01.CONFIDENTIAL
BOX NUMBER
[ ]
1.YES
SETUP PASSWORD
2.NO