Filter
Top Products
230
ADF TEST
Press:
+
+
+
+
Select the ADF TEST
Menu
1
The ADF test checks the opera-
tion of the ADF by transporting
and unloading documents. You
can check that the ADF is nor-
mal if the number of documents
loaded is consistent with the
number of documents trans-
ported and unloaded.
Load the documents in the
document support.
If a document jam occurs during
transport, the screen below is
displayed.
You can change the transport
speed by pressing
.
STD: Fast
FINE (Same when HALF
TONE is set): Medium
U-FINE (Same when HALF
TONE is set): Slow
Remove the jammed docu-
ments, the screen below is dis-
played.
ADF TEST
LOAD DOCUMENT
ADF TEST
PAGES 01
ADF TEST
DOCUMENT JAM
To continue the ADF Test,
press:
Return to Step 2.
ADF TEST
[STOP] TO COMPLETE
Load the Documents
2
Press:
The documents will be trans-
ported one by one and the num-
ber of documents unloaded will
be displayed at the lower right
on the screen.
ADF TEST
PRESS[START]
To end the test, press:
Go to Step 3.
2.NG
ADF TEST
1.OK
Select the ADF Test
Result
3
If the number of documents
loaded is consistent with the
number of documents unload,
press:
If a document has not fed prop-
erly (even once), press: