Filter
Top Products
44
Dial Type Setting
There are two types of dialing
modes: DP [Dial Pulse (Rotary)]
and MF [Multi-Frequency (touch
tone)]. If your telephone emits
tones when you are dialing, this
usually indicates that you have
a MF type line and no adjust-
ment is required. Otherwise, you
will have to select the appropri-
ate setting.
To display the SETUP menu,
press:
+
Select your dial line type.
(for Multi-Frequency type)
default
(for Dial Pulse type)
After selecting the dial type, the
following will be displayed.
PBX Access Digits such as 9,
pause, and 1 need to be omitted
when using chain dialing.
If you will not be using the Chain
Dial feature, press
to
skip this step.
Otherwise, enter the Access
Digits to be deleted (max. 10
digits) using the Dial Keypad.
When the correct Access Digit is
displayed, press:
Display
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to exit the Configuration Setting
mode and return to the Standby
Mode.
Display the DIAL
TYPE Menu
1
Select Your Dial
Type
2
Enter the Access
Digits
3
Select Another
SETUP Item, or ...
4
Access digits are numbers
which are required by PBX sys-
tems to access the phone sys-
tem “outside” the PBX. A com-
mon access digit is “9.”
INITIAL SETUP
1.LANGUAGE
INITIAL SETUP
4.DIAL TYPE
DELETE ACCESS DIGIT
[ ]
Displayed for 2 seconds
COMPLETED
Returns to display the SETUP
menu screen.
2.PULSE
DIAL TYPE
1.TONE
Using or and
press:
or